The specs I'm seeing for the 2015 Starcraft AR One Maxx 19BH LE show it being 22.17' in length so I recommend the Adco Polypropylene Storage Lot RV Cover for Travel Trailer - Up To 24' Long - Tan Item # 290-74842. This storage lot cover works best for long-term storage in all climates. The heavy-duty, 4-layer fabric protects against UV rays, dirt, wind, and snow. The slip-seam strap system ensures snug fit and prevents damage from high winds and secures with cam buckles. As you can see... view full answer...
For your 2020 Forest River Surveyor Legend Travel Trailer I recommend Adco SFS AquaShed Cover for Travel Trailer - Up to 24' Long - Gray # 290-52242.
This cover will give you 6 inches of clearance length-wise and 11 inches width-wise.
I've attached a video offering additional information for you. view full answer...
To measure for fit of the Lippert SolidStep, measure the entry way from right to left at the narrowest point. Generally there will be a flat metal flange that extends out 1/2" all around. This is the flange that the door closes against and keeps the door from trying to swing inside. From that measurement, round up to the next even inch.
So, your door (at the narrowest point) is 21-1/4" wide to the door flange, and rounded up we get 23". The narrowest width for solid steps is 24 inches.... view full answer...
To know what entry door lock will fit your 2019 Forest River Surveyor you'll have to first remove your current entry door lock and measure the cutout hole. The Bauer Products Keyless Entry Camper Door Lock - Right Hand - 6-1/8" Wide x 4-5/8" Tall # BA76FR you linked to will fit a cutout hole 3-3/4" tall x 2-3/4" wide. view full answer...
We have the Camco RV Fresh Water Backflow Preventer part # CAM23402 which is the correct size you are looking for of 3/4 inch. Near the pump would be just fine. view full answer...
Based on the information you provided you will need 2 sets of the SumoSprings Trailer Helper Springs # TSS-107-40 for your 2022 Forest River Surveyor Legend 202RBLE travel trailer. These springs are compatible with axles from 3,000-5,000lbs. Your Surveyor has two 3,500lb axles positioned in an over slung position with the axle below the leaf springs. view full answer...